Blockage of material in the crushing chamber
Blockage of the material can also cause sudden stop of the equipment. At this time, the material should be cleaned up. In the subsequent use, materials with large particle size or high water content are prohibited from entering the machine, and the feeding material should be kept uniform to avoid excessive feeding.
V-belt too loose
Check if it is a problem with the V-belt. If it is too loose and cause downtime, adjust the tightness of the V-belt. If the V-belt loses its tightness due to long-term use, replace the V-belt.
Operating voltage is not suitable
When the working voltage of the production site is too low, it is not enough to stop the normal operation of the sand making machine. In this case, select the voltage that meets the requirements of the device.