A Method For Improving Production Efficiency Of Limestone Micro Grinding

The comprehensive use of the open limestone resources has been fully affirmed in the great construction of industrialization.As for what kind of grinding equipment to choose, according to the needs of customers for a reasonable configuration.This grinding machine has unmatched advantages in the efficient processing of limestone.So how to improve the working efficiency of micro grinding  limestone?

Customers purchase and use of micro powder mill, although there will be production factory technical guidance, production and its detailed instruction of theory, but in the actual production, the client will according to the requirements of its production, some concrete measures to increase the working efficiency of the micro powder grinding equipment, to a large extent is the actual yield is higher than the theoretical yield.

Specific methods are mainly the following three points, as appropriate, please deal with:

First, the humidity of limestone material.Micro-grinding is mainly applicable to kaolin, coke, bentonite, pyrophyllite, shale, gypsum, graphite, silicon carbide and other 100 kinds of Mohs hardness below grade 6, humidity in 6% of various non-flammable and explosive mineral materials.But you should also avoid too much dryness.Productivity can help, and it needs to be controlled by the customer.

Two, the size of the current.The operation of micro grinding is started by the motor, the motor starts an important factor is the size of the current, when the current increases, the motor will increase the energy input to the mill, the increase of energy will drive the increase of the speed of the device in the equipment, so as to improve the work efficiency to a certain extent.But the range of current increase is limited, the user in the process of increasing the current must control its actual power within the rated power range, can not exceed the range, otherwise easy to cause damage to the machine.

Three, the fineness of material grinding.The particle size of fine powder is adjustable between 325-3000 mesh, and the output can reach 0.4-4.5 tons per hour.When the fineness of the finished product is greater, the output will decrease correspondingly.In order to shorten the grinding time in the production of micro grinding, you can choose to increase the crusher before the head is broken, according to the adjustment of fineness, so as to increase the working efficiency of micro grinding.

Too tired to read? Try staff service!

Engineer one-to-one for you, draw up plans in time, and provide investment estimates in time!

More Info

Activated Carbon Processing Project Case

Activated Carbon Uses

Influence Of Various Indexes Of Ground Calcium Carbonate On Application Performance

Uses For Calcium Carbonate

What Is The Difference Of GCC, PCC And Nano-CaCO3 Coating